Bench Lathe Machine C0636A
Features
Iyo inotungamira nzira uye ese magiya ari mumusoro stock akaomeswa uye nemazvo pasi.
Iyo spindle system yakakwira kuomarara uye kurongeka.
Iwo machina ane simba musoro stock giya chitima, yakakwirira kutenderera kurongeka uye kutsetseka kumhanya neruzha rwakaderera.
Iyo yakawandisa yekuchengetedza mudziyo inopiwa pane apron.
Pedal kana electromagnetic braking mudziyo.
Tolerance test certificate, test flow chart inosanganisirwa
1. Precision pasi yakaoma mibhedha
2. The spindle inotsigirwa shuwa precision roller bearings
3. Headstock gears yakagadzirwa nesimbi yepamusoro, pasi uye yakaoma
4. Gomba rinobviswa rinopihwa kune yakakura dhayamita basa
5. Easy operation speed change levers
6. Spindle speed range 70 ~ 2000r / min
7. Mibhedha miviri yakareba yakasiyana inowanikwa
8. Easy operating gear box ine zvakasiyana-siyana zvekudya uye thread yekucheka basa
9. D1-4 camlock spindle mhino
Zvinotsanangurwa
| MODELS | C0636A |
| Svetera pamubhedha | 360mm(14") |
| Svetera pamusoro pemuchinjikwa slide | 224mm(8-13/16") |
| Swing mugap diameter | 502mm(19-3/4") |
| Swing pakureba | 210mm(8-1/4") |
| Center urefu | 179mm(7") |
| Distance between centre | 750mm(30")/1000mm(40") |
| Mubhedha wakafara | 187mm(7-3/8") |
| Hurefu hwemubhedha | 1405mm(55-5/16") |
| Kureba kwemubhedha | 290mm(11- 13/32") |
| Spindle yakaboora | 38mm(1-1/2") |
| Spindle mhino | D1-4" |
| Taper mumhino | MT NO.5 |
| Taper mune sleeve | MT NO.3 |
| Kumhanya nhamba | 8 |
| Range yespindle speed | 70-2000 r/min |
| Muchinjika masiraidhi upamhi | 130mm(5-3/32″) |
| Cross slide kufamba | 170mm(6-11/16") |
| Compound rest width | 80mm(3-1/8″) |
| Compound kuzorora kufamba | 95mm(3-9/16") |
| Lead screw dhayamita | 22mm(7/8″) |
| Lead screw thread | 8T.PI kana 3mm |
| Feed tsvimbo dhayamita | 19mm(3/4") |
| Kucheka chishandiso max chikamu | 16mm×16mm(5/8"×5/8") |
| Mitambo yeumambo | 34 Nha.4-56 TPI |
| Mathreads metric pitches | 26 Nos.0.4-7 MP |
| Longitudinal inodyisa imperial | 32 Nos.0.002-0.548"/Rev |
| Longitudinal feeds metric | 32 Nos.0.052-0.392mm/Rev |
| Cross feeds ishe | 32 Nos.0.007-0.0187"/Rev |
| Cross feeds metric | 32 Nos.0.014-0.380mm/Rev |
| Quill dhayamita | 32mm(1-1/4") |
| Quil kufamba | 100mm(3-15/16") |
| Quill taper | MT NO.3 |
| Kune main motor | 2HP, 3PH kana 2PH, 1PH |
